The JCRA 2003 will give three prizes in the following
categories:
Best FPGA-based Educational Board
Best Scientific Paper
Best Tutorial
JCRA 2003 prize to the best FPGA-based
Educational Board
The objective of this prize is to encourage the design
of educational boards for student laboratories of Reconfigurable Computing
and FPGA-based Digital Design. Industrial applications or research-oriented
works won't be admitted.
The best work will be chosen among all articles presented in JCRA'2003.
The inclusion of additional hardware in the board, such as an VGA interface,
microcontrollers, DACs and ADCs, memories, etc... is admitted.
The article that describes the board should include, among others, schematic,
VHDL code, application examples, etc...
The items which will be evaluated are: usefulness, originality, aspect
and finishing of the product, quality of the practical examples, board
cost, possibility to be used by other universities (open-hardware).
The jury will be composed by the members of the Program Committee attending
the workshop. The jury will be able to ask any additional questions
to the candidates during the workshop, and to debate during the time
that they consider necessary about the presented works.
The presentation of the boards will be carried out during a brief session
of demonstrations inside JCRA. The participants should inform in advance
about the audiovisual material needed (monitor, PC, etc...).
Results
| Position |
Work |
Points |
| 1 |
Laboratorio Web para Prototipado y Verificación de Sistemas
Hardware/Software, Gómez-Arribas F.J., González I.,
González J. y Martínez J. |
78 |
| 2 |
Arquitectura Híbrida Reconfigurable para Aplicaciones Web,
Rodríguez Lozano D., Sánchez Pérez J.M., Gómez
Pulido J.A. |
72 |
| 3 |
Tarjeta Didáctica para Prácticas de Circuitos Lógicos
en FPGA, Leyva-Hernández G., Jaramillo-Ramírez R.
|
52 |
The prize was a Xilinx
Spartan™-II Evaluation Kit from Avnet Design Services.
JCRA 2003 prize to the best Scientific
Paper
The objective of this prize is to recognize those
works which stand out for its quality or originality.
The best work will be chosen among all the articles presented in JCRA2003.
The items which will be evaluated are: quality, clarity and usefulness.
The tribunal will be composed by the members of the Program Committee
attending the workshop.
Results
| Position |
Work |
Points |
| 1 |
DIGIMOD: una Herramienta para Implementar Módems en Banda
Base y en IF sobre FPGA, Marín-Roig J., Torres V., Canet
M.J., Pérez A., Sansaloni T., Angarita F., Almenar V., Valls
J., Cardells F., Viñedo F. |
28 |
| 2 |
Un Sistema de Enrutamiento Dinámico para un Circuito Re-
configurable Bio-Inspirado, Thoma Y., Sanchez E., Tempesti G., Moreno
Arostegui J.M. |
27 |
| 3 |
Codiseño Hardware-Software de un Algoritmo de Matching
Biométrico, Fons M., Fons F., Canyellas N., Cantó
E., López M. |
25 |
The prize was a RC200
Development Board from Celoxica.
JCRA 2003 prize to the
best Tutorial
The objective of this prize is to recognize those
works which stand out for its quality or originality.
The extension of the tutorial is up to 10 pages. It will be also presented
in a oral session.
The best work will be chosen among all the articles presented in JCRA
2003.
The items which will be evaluated are: quality, clarity and usefulness.
The tribunal will be composed by the members of the Program Committee
attending the workshop.
Results
| Position |
Work |
Points |
| 1 |
Reconfiguración Dinámica en FPGAs: Los Estilos Atmel
y Xilinx, García Lorenz M., Lopez-Buedo S. |
80 |
| 2 |
Soluciones en Circuitos Analógicos Programables (FPAA),
Guerrero-Rodríguez J.M., Gómez-Vela D., Quirós-Olozabal
A. |
62 |
| 3 |
Diseño Electrónico para Aplicaciones Espaciales,
Ortega J.A. |
40 |
The prize was a Xilinx
Spartan™-II Evaluation Kit from Avnet Design Services.
Evaluation
16 committee members punctuated the best 6 works for each category,
with 10, 6, 4, 3, 2 y 1 points.
The total number of scientific papers, tutorials and FPGA-based educational
boards was 52, 11, y 8 respectively.
